Can LAN and WAN be same subnet?
At a minimum, hosts on the LAN will be able to reach either the WAN subnet, or hosts on the LAN which are in the WAN range. (you could try adding a static route, for example.) But never both. Also, WAN hosts will not be able to reach LAN hosts in the same IP range.
Should WAN and LAN subnet mask be the same?
The LAN IP of the router should be configured so that it is also the WAN IP and the subnet mask should match your range (255.255. 255.248 for a range of 8 IPs, 255.255. 255.252 for a range of 4 IPs). Finally NAT (Network Address Translation) should be disabled on the router.
What is subnet in WAN?
A subnet, or subnetwork, is a segmented piece of a larger network. More specifically, subnets are a logical partition of an IP network into multiple, smaller network segments. The Internet Protocol (IP) is the method for sending data from one computer to another over the internet.
How do I find my WAN side subnet?
- In the Windows search fields, type cmd, to open command prompt.
- Press Enter.
- Type ipconfig/all press Enter.
- Find your network settings.
- Your PC’s IP address and your network Subnet Mask and Gateway will be listed.
How do I fix LAN subnet conflicts with WAN subnet?
Re: WAN subnet conflicts with LAN subnet do a factory reset and use the onboard wizard on the router to set up the router. Ensure your PC is using automatic obtain IP addressing. Do Not Use Static IP addressing.
What is WAN IP and LAN IP?
LAN IP address is the address given to your host within your local area network, while your WAN IP would be the address given to your routers interface that is connected to the internet, usually at your point of demarcation between you and your ISP.
How do I set a static IP address on my router?
How to Set a Static IP Address
- Access the Control Panel. In the Windows search bar, type in “ncpa.
- Select the Network Adapter.
- Select Properties.
- Select Internet Protocol Version 4 (TCP/IPv4)
- Manually enter IP address and subnet mask.
- Save Settings.
- Revert Back to DHCP.
- Glossary.
Is subnet same as LAN?
VLAN is a logical LAN that contains broadcasts within itself, and only hosts belonged to that VLAN will see those broadcasts. Subnet is an IP address range of IP addresses that help hosts communicate over layer 3. VLAN allows us to create different logical and physical networks.
Is a subnet a LAN?
tldr; A subnet is a logical IP network and LAN is a physical network running some kind of layer 2 networking protocol that may also be running TCP/IP.
What would a subnet mask with 30 mask bits look like?
A /30 bit mask would be 30 one’s, leaving just 2 zero’s that could be used for host addressing. If you apply the hosts formula, you get 2^2 = 4 – 2 = 2 useable IP addresses. In other words, our network would look like this: Network.
Who is WAN IP?
(Wide Area Network Internet Protocol address) The WAN IP is the IP address assigned to the Internet-facing (public-facing) side of a network by the network administrator in a large enterprise or by an ISP. See IP address, WAN port and WAN.