How do I console my HP ProCurve switch?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

How do I console my HP ProCurve switch?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

How do I reset my HP ProCurve Switch 2524?

To execute the factory default reset, perform these steps:

  1. Using pointed objects, simultaneously press both the Reset and Clearbuttons on the front of the switch.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to flash, release the Clear button.

How do I access the HP ProCurve switch web interface?

Verify the configuration Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. Then the web login page of the Device appears. On the login page, type the username usera, and password 123 to enter the web management page.

How do I reset my HP ProCurve 2650?

To execute the factory default reset on the switch, perform these steps:

  1. Simultaneously press the Reset and Clear buttons on the front of the switch with a paperclip.
  2. Continue to hold the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my HP ProCurve 2510 to factory settings?

To execute the factory default reset, perform these steps: 1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. 2. Continue to press the Clear button while releasing the Reset button.

How do I reset my HP a5120 to factory settings?

Re: Resetting 5120 to default factory settings

  1. Download application file to flash.
  2. Select application file to boot.
  3. Display all files in flash.
  4. Delete file from flash.
  5. Restore to factory default configuration.
  6. Enter BootRom upgrade menu.
  7. Skip current system configuration.
  8. Reserved.

How do you set up a ProCurve Switch?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

What is HP ProCurve Switch used for?

Yes, the HP ProCurve Switch 2224 is designed to be used primarily as a desktop switch to which end nodes, printers and other peripherals, and servers are directly connected, as shown in the illustration below. Notice that the end node devices are connected to the switch by “straight-through” twisted pair cables.

How do I get to the GUI in Aruba switch?

Starting a web browser session The Aruba 2930F switches can be managed through a graphical interface that can access from any PC or workstation on the network by running r web browser and typing in the switch’s IP address as the URL.

How to configure a HP ProCurve switch?

How to: Configure a HP ProCurve switch Step 1: Connect your serial connection. Connect to the console port of your switch via a serial cable. Older switches… Step 2: Conenct PuTTY. It’s just a standalone .exe with nothing to install. Run PuTTY, and select the ‘serial’ radio… Step 3: Get the IP

What is the publication number for ProCurve switch 2512?

Publication Number 5969-2354 October 2005 Applicable Product ProCurve Switch 2512 (J4812A) ProCurve Switch 2524 (J4813A) Trademark Credits Microsoft, Windows, Windows 95, and Microsoft Windows NT are registered trademarks of Microsoft Corporation. Internet Explorer is a trademark of Microsoft Corporation.

How do I connect the HP ProCurve 2300 to a PC?

■The Series 2300 switch is connected by a “null modem” serial cable between the Download Port on the front of the switch and the COM1 or COM2 port on a PC or workstation, which is operating as a terminal. You can also use one of the console cables that is supplied with all “managed” HP ProCurve switches and hubs (devices with Console ports).

What is the default port configuration for the switch 2512/2524?

(For the Switch 2512 and 2524, HP recommends leaving the port Mode setting at Autoor, in networks using Cat 3 cabling, Auto-10.) Port Configuration: The default port configuration on the Switch 2512/2524 is Auto, which enables a port to sense speed and negotiate duplex with an Auto-enabled port on another device.