How do I find my WWN number HP-UX?

How do I find my WWN number HP-UX?

Re: Command to know WWN of HBA on hp UX. You need to run the ioscan to find out the name of your card, then run the fcmsutil.

How do I find my WWN number HP server?

  1. Log into ILO either directly or via the blade enclosure.
  2. Go to the Information tab of your server.
  3. WWN id can be found under the info box for your HBA (see screendump below)

What is the latest version of HP-UX?

11i v3
A major contributor to this article appears to have a close connection with its subject.

Developer Hewlett Packard Enterprise
Source model Closed source
Initial release 1982
Latest release 11i v3 May 2021 Release Edition 1 / May 2021
Marketing target Server

How do I find my HBA firmware version on Windows?

In right pane of Device manager you will see SCSI and RAID Controller, expand it and right click on appropriate HBA – and check PROPERTIES. You will see Driver tab, and the version of HBA Windows driver is listed there.

How do I know what architecture my HP UX is?

Just run command “model” to know which architecture your server have.

What Unix version do I have?

What are the two major Unix system versions?…Which is the latest version of Linux?

Release General Availability Date Kernel Version
RHEL 7.7 2019-08-06 3.10.0-1062
RHEL 7.6 2018-10-30 3.10.0-957
RHEL 7.5 2018-04-10 3.10.0-862
RHEL 7.4 2017-07-31 3.10.0-693

What is HP-UX server?

Hewlett-Packard Unix (HP-UX) is an implementation of the Unix operating system that is based on the UNIX System V, developed by Hewlett-Packard and first released in 1984. It was originally developed for HP’s proprietary Integral PC and then made to run on 9000 series business servers.

How do I check my BIOS HBA?

Select the HBA for the startup device. a. During the startup of the application server, press ALT+E to go to the BIOS setting page. The system displays the HBA of the current system, as shown in Figure 6.

How can I check my FC card status in Windows?

run “fcinfo” command in Command Prompt. It will show up HBA connected to the server with WWN.

How do I know if my OS is Unix or Linux?

How to find your Linux/Unix version

  1. On command line: uname -a. On Linux, if the lsb-release package is installed: lsb_release -a. On many Linux distributions: cat /etc/os-release.
  2. In GUI (depending on GUI): Settings – Details. System Monitor.