Check the height Bring your measuring tape with you. Measure the toilet from the base of floor to the top of the seat. The top of the toilet bowl, with the toilet seat attached, must be between 17” – 19” after installation to comply with ADA regulations.
Table of Contents
How do I know if my toilet is ADA-compliant?
Check the height Bring your measuring tape with you. Measure the toilet from the base of floor to the top of the seat. The top of the toilet bowl, with the toilet seat attached, must be between 17” – 19” after installation to comply with ADA regulations.
What size is an ADA-compliant toilet?
The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”. Other rough-in dimensions in older homes can be 10” or 14”.
How far does an ADA toilet have to be off the wall?
60”
There must be a clearance around a toilet of a minimum of 60” from a side wall. Also, the water closet, measured perpendicular from the rear wall, must be a minimum of 56” deep for wall mounted units and a minimum of 59” deep for floor mounted units to allow wheelchair access.
What are the specs for handicap bathroom?
A clear circle of at least 60 inches around the side wall and 56 inches from the rear wall to allow a wheelchair to turn (the door cannot swing into the minimum required area for wheelchair-accessible toilet compartments). A toilet seat height of 17-19 inches.
What is an ADA approved toilet?
ADA-accessible toilets must be between 17 and 19 inches from the floor to the top of the toilet seat, allowing for an easier transition from wheelchairs. ADA-accessible toilets primarily used by children below the age of 12 must be between 11 and 17 inches from the floor to the top of the toilet seat.
What is the difference between a standard and an ADA toilet?
The ADA compliance act under the exception clause 604.4 outlines that the ideal height for physically challenged people or the elderly requires 2 to 3 inches taller (ADA height) with an elongated toilet (handicap toilet) than the standard toilet with a height of 16 inches.
What is the difference between an ADA toilet and a non ADA toilet?
A comfort height toilet is sometimes known as an Americans with Disabilities Act (ADA) toilet because the height matches that used for ADA-compliant toilets, 17 to 19 inches from floor to seat. This is like the height of a chair. The height of a standard toilet is about 15 inches from floor to seat.
How small can an ADA bathroom be?
From bathing features and sinks to toilets, many options exist within ADA guidelines. There must be a space radius of 60 inches so a wheelchair user can turn 180 degrees. For smaller T-shaped bathrooms, if there are aisles of 36 inches so the chair user can do three-point turns, that will suffice.
How do I make my bathroom ADA compliant?
These include:
- Grab Bars. One of the first tweaks in making your bathroom ADA compliant is installing grab bars.
- Accessible Toilets. An ADA-compliant toilet should be at least 60 inches wide and have a seat between 17 and 19 inches from the base of the unit to the seat top.
- Ample Room.
- Properly Sized Sink.
- Shower Seats.
What’s the difference between a standard toilet and a handicap toilet?
The only difference between an Comfort Height toilet (or what is sometimes referred to as a handicapped toilet) and a regular toilet is that it that an Comfort Height toilet has a higher seat. A regular toilet has a seat which is fifteen inches tall.
Are ADA toilets higher?