How do I reset my BIOS on my HP EliteBook?

By Blog

How do I reset my BIOS on my HP EliteBook?

Turn on or restart HP Elitebook, and then press ESC key while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press F10 to enter BIOS Setup. Use a pointing device or the arrow keys to select File -> Restore defaults. Follow the on-screen instructions.

How do I reset my HP EliteBook 2540p?

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

  1. Turn on or restart the computer, and then press. esc.
  2. Press. f10.
  3. Use a pointing device or the arrow keys to select File > Restore Defaults.
  4. Follow the on-screen instructions.

How do I reset my HP EliteBook 2540p password?

Insert flash drive into locked laptop and boot.”If HDD is installed remove before booting.” First thing is to save your settings. Select #3 re-program. Press “S” to save system information.

How do you Reset the BIOS on an HP laptop?

How to reset BIOS settings on Windows PCs

  1. Navigate to the Settings tab under your Start menu by clicking the gear icon.
  2. Click the Update & Security option and select Recovery from the left sidebar.
  3. You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.

How do I fix a corrupted BIOS on a HP desktop?

Use this procedure to reset the CMOS and recover the BIOS.

  1. Turn off the computer.
  2. Press and hold the Windows + V keys, and then simultaneously press and hold the power button.
  3. When the CMOS Reset screen displays or you hear beeping sounds, release the Windows + V keys.
  4. Press enter to restart the computer.

How do I hard reset my HP Elitebook?

Turn off the computer, and then unplug the power cord. Disconnect any peripheral devices, and then remove the computer from any port replicator or docking station. With the power cord unplugged, press and hold the Power button for approximately 15 seconds. After you drain the capacitors, plug in the power cord.

How do you reset the CMOS on a HP laptop?

Reset the CMOS

  1. Turn off the computer.
  2. Press and hold the Windows + V keys, and then simultaneously press and hold the power button.
  3. When the CMOS Reset screen displays or you hear beeping sounds, release the Windows + V keys.
  4. Press enter to restart the computer.

What is EliteBook default BIOS password?

The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers.

How do I get into the BIOS on an HP EliteBook?

Pressing your assigned BIOS hotkey while your computer boots up should retrieve the BIOS setup utility screen you’re looking for. For example, on an HP Pavilion, HP EliteBook, HP Stream, HP OMEN, HP ENVY and more, pressing the F10 key just as your PC status comes up will lead you to the BIOS setup screen.

How do I Reset my HP EliteBook to default settings?

Turn on or restart HP Elitebook, and then press ESC key while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Press F10 to enter BIOS Setup. Use a pointing device or the arrow keys to select File -> Restore defaults. Follow the on-screen instructions.

How to boot HP EliteBook 2540P in UEFI boot mode?

Prepared HDD installed into locked HP Elitebook 2540p 4. After boot just like GBL84 said: Press “S” to save system information. Select “SHOTGUN.” 5. After another reboot hit ESC then F10 -> BIOS Setup. 6. Go to System Configuration -> Boot Option: select UEFI Boot Mode and 7. Set Legacy Boot Order to USB or CDROM first 8.

How do I remove the HP EliteBook BIOS password?

If you’ve set up the SpareKey, you can follow these simple steps to remove HP Elitebook BIOS password: Turn on the computer and immediately press the ESC key to display the Startup Menu, and then press the F10 to enter BIOS Setup.

How do I Reset my HP laptop to factory settings?

Insert flash drive into locked laptop and boot. ”If HDD is installed remove before booting.” At C:\\OUTPUT type CD.. “Then hit enter” First thing is to save your settings. Select #3 re-program. Press “S” to save system information. Type HPBR and hit enter. Since your model is not listed select “SHOTGUN.” After reboot repeat “SHOTGUN” a second time.