How do I reset my PetSafe collar remote?

Press and hold the on/off button until you hear a low to high beep and the green LED appears, and then release. NOTE: The handheld remote is always on, and the display will appear when any button is pressed. Press and hold the on/off button until the collar beeps high to low, and then release.

How do I reset my PetSafe collar remote?

Press and hold the on/off button until you hear a low to high beep and the green LED appears, and then release. NOTE: The handheld remote is always on, and the display will appear when any button is pressed. Press and hold the on/off button until the collar beeps high to low, and then release.

How do you program a PetSafe shock collar?

Press the button on an angle to see the upper half of the button while holding. Press and hold the upper left button on the remote to pair the collar. The collar will flash five times and then begin beeping to confirm it is paired. Release the button and test to confirm it is properly paired.

What is the button on a PetSafe collar for?

Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous flashes. The Static Correction Levels increase from 1 to 5. Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1.

Why is my PetSafe collar not working?

If Receiver Collar does not beep and the Test Light does not flash, replace the 10. battery in the Receiver Collar. If it still does not beep and the Test Light does not flash, contact the Customer Care Center at 1-800-732-2677. If the Receiver Collar beeps, there may be a complete or partial break in the 11.

How do I resync my PetSafe wireless collar?

How do I sync my PetSafe collar to my transmitter?

  1. Remove your pet’s receiver collar.
  2. Remove the Battery from the Receiver Collar.
  3. Move the limit switch of the transmitter from the lower position to the upper position.
  4. Slowly set the limit switch to # 8, down to # 1, then return to position # 4.

Why is my PetSafe collar beeping but not shocking?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

How do I know if my PetSafe collar is on?

Test the Receiver Collar with the Test Light walking toward • the Boundary Wire. If the Test Light flashes, check the fit of the Receiver Collar. Trim your pet’s fur where the Contact Points touch the • neck and/or purchase longer Contact Points by contacting the Customer Care Center at 1-800-732-2677.

How do you reset a stubborn dog collar?

To reset the low battery indicator, remove the battery from the Receiver Collar. Discharge all power by holding the correction level button down until the light is no longer illuminated. Reinstall battery.

Is there a replacement battery pack for the rfa-416?

This replacement RECHARGEABLE BATTERY PACK works with fits inside the handheld remote transmitters of petsafe stubborn dog trainer hdt11 yard and park pdt00 it will work in any transmitter model RFA-416 is found on back panel. As described. Quick shipment. (09-27-18) Review#4 by traininobedien#4, As described. Quick shipment. ( 09-27-18)

What should I know before using the PetSafe®remote trainer?

• While the Stimulation is unpleasant, it is harmless to your pet. Electronic training devices require interaction and training from the owner to achieve desired results. before using the PetSafe®Remote Trainer? • Your pet should be able to recognize basic obedience commands such as “Sit” or “Stay”.

What is the PetSafe®basic remote trainer?

The PetSafe®Basic Remote Trainer has been proven safe, comfortable, and effective for both small and large dog breeds. Using the Remote Trainer consistently and correctly, any basic obedience commands can be taught and many misbehaviors that your pet exhibits can be corrected. Important: The Basic Remote Trainer has a range of up to 75 yards.

How do I contact PetSafe customer service?

If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677. To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net.