How do I reset my Sub-Zero ice maker?

After freeing obstructions, turn the unit off, then on again to reset. Let 24 hours pass, and then check for ice cubes in the ice bin. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product.

How do I reset my Sub-Zero ice maker?

After freeing obstructions, turn the unit off, then on again to reset. Let 24 hours pass, and then check for ice cubes in the ice bin. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product.

Why did my sub-zero stop making ice?

Verify the ice maker water fill tube is not blocked. See Ice Maker Fill Tube Frozen. After freeing obstructions, turn the unit off, then on again to reset. If ice production stops often with the use of a reverse osmosis system or well water, a pressure booster or regulator may improve performance.

Why would an ice maker suddenly stop working?

If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.

How do I turn on the ice maker in my Sub-Zero freezer?

Answer: To turn the ice maker on or off for Classic (BI) products, touch the Ice Maker key on the control panel. The control panel is found at the top of the unit when the door is opened. A single ice cube icon illuminates when the ice maker is on.

How long does it take to make ice in a Sub-Zero?

1-2 days
Answer: All Sub-Zero in-unit ice makers produce eight cubes of ice every 2-3 hours on average. The ice bin may take 1-2 days to fill completely. Ice production for Classic (BI) and Designer (IT, IC, ID) models may be temporarily increased by initiating the Max Ice feature.

Why do ice cubes get stuck in ice maker?

Ice Maker Gets Stuck If the ice storage bin gets too full or isn’t used often enough, slight melting and refreezing may cause ice cubes to stick together in clumps, making it impossible to dispense them. Remove the ice storage bin from the freezer and break clumped up ice with your hands.

How do you troubleshoot an ice maker?

Ice Maker Troubleshooting Guide

  1. Check the shutoff arm.
  2. Check the supply valve.
  3. Inspect the water supply line.
  4. Test the shutoff switch.
  5. Check the freezer temperature.
  6. Inspect the ejector gear.
  7. Test the ejector motor.
  8. Test the ice mold heater.