To reset your watchman:
Table of Contents
How do I reset my watchman oil monitor?
To reset your watchman:
- Switch the Watchman on and off. You will see a serial number followed by a lower case R which stands for Reset.
- Unscrew and remove the power tube (battery) wait for 2 minutes and then screw the battery back on.
- Within a few minutes the Watchman should display the level of oil in your tank.
How do I change the battery in my watchman watch?
9 Steps to replacing the battery: Take transmitter indoors, into a clean dry environment. Using a cross point screwdriver, undo the four screws, located under the main body of transmitter. Remove the top cover, Flip out battery, Clip in new battery, Re-fit cover. Evenly tighten all four screws – do not over tighten.
How do I pair my watchman?
Pairing Transmitter and Receiver the gauge is located inside the lid on the inner tank. Take the transmitter disc to the white receiver which should be plugged into the mains in your home. After the disc has been synced with the receiver take the disc straight back out and fix it to the tank.
Why is my Watchman Sonic not working?
My Watchman sonic is not reading correctly, what do I do? Ensure that the space beneath the Watchman Sonic unit is free of any obstacles and that the ultrasonic beam path is clear of obstructions.
Why is my Apollo ultrasonic flashing?
What is the meaning of a flashing triangle and middle bar showing? This indicates no ultrasonic echo is being received from the liquid surface. Ensure the bottom of the transmitter is clear from dirt or moisture. In some cases, a white chalky residue can build up on the cone of the device.
How do you check the oil level in a heating oil tank?
To measure your tank manually Mister C says; take the cap off the top of the tank, which is where the fuel goes in, and put the dipstick right down to the bottom of the tank. When the stick is withdrawn, the oil will leave a mark on the stick consistent with the level of oil.
How does the watchman oil monitor work?
The Watchman Oil Monitor acts as a level sensor to indicate how much home heating oil is left in your oil tank. This handy tool is one of the Fuel Essentials products which Kingspan Smart Monitoring offer.
What is the warranty period for the watchman Sonic oil level monitors?
Our warranty period for the Watchman Sonic oil level monitors is 12 months. To check whether your unit is still under warranty look on the back of your receiver for a 6 digit number (under Part No), e.g. A45-2817 (28/17). If you are within 12 months of this date your unit is still covered by our warranty.
Can the watchmansonic be used with other fluids?
Suitable for use in tanks for the storage of diesel fuel, kerosene, and gas oil types A2, C1, C2 and D as defined by BS 2869. Check with the manufacturer and/or supplier before using with any other fluids. Ensure before you start your install that the tank the WatchmanSonic is to be fitted to is:
How does the watchman Sonic work?
The Watchman Sonic is one of the award winning Watchman tank monitoring range from Kingspan. It acts as a level sensor to indicate how much home heating oil is left in your oil tank. This helps you to ensure that you never run out of oil. If playback doesn’t begin shortly, try restarting your device.