Costs of a Rail Siding
Table of Contents
How much does railroad ballast cost?
Costs of a Rail Siding
| Price per Unit [-] | Total Cost [-] | |
|---|---|---|
| No.2 Relay 132/136 lb rail | $700 per ton | $171,500 |
| 7″x9′ Ties on 21″ Centers | $55.22 per tie | $166,598.74 |
| Ballast (Rock) | $27.00 per ton | $162,000.00 |
| Spikes 68 Kegs | $65.00 per keg | $4,000 |
What size stone is railroad ballast?
Railroad ballast is typically graded from 1 ¾” or 1 ¼” to ½”. Ballast is open graded and washed over a screen as part of the production process. The load that rail cars place on the track is large. Each axel on loaded rail car places a load of up to 71,500 lbs.
What rock is used for railway ballast?
Ballast is produced from natural deposits of granite, trap rock, quartzite, dolomite or limestone.
What kind of rock is used on train tracks?
Ballast also holds the track in place as the trains roll over it. A variety of materials have been used as track ballast, including crushed stone, washed gravel, bank run (unwashed) gravel, torpedo gravel (a mixture of coarse sand and small gravel), slag, chats, coal cinders, sand, and burnt clay.
How much does a km of railway cost?
NEW DELHI: Construction of one kilometer of high speed railway track will cost Rs 100-140 crore and the country will need a total of Rs 80,000 crore to lay the entire high speed train corridor, Lok Sabha was informed today.
How much does a railroad switch cost?
How much does a rail switch cost?
| Price per Unit [-] | Total Cost [-] | |
|---|---|---|
| No.10 Degree Switches | $25,000 per switch | $50,000 |
| No.10 Switch Timbers | $6,200 per timber | $12,400 |
| No.2 Relay 132/136 lb rail | $700 per ton | $171,500 |
| 7″x9′ Ties on 21″ Centers | $55.22 per tie | $166,598.74 |
Which is the best material for ballast?
The stone to be used as railway ballast should be hard, tough nonporous and should not decompose when exposed to air and light. Igneous rocks like quartzite and granite forms the excellent ballast materials. When these are not available then lime stone and sand stone can also be used as good ballast material.
What is railway ballast made of?
Rail Track Ballast is typically made from crushed granite which has been screened to remove undesirable fines thus creating a hard wearing, free draining and easily cleaned aggregate. Typically Rail Track Ballast is packed between, below, and around the sleepers by specialised equipment.
Why railway tracks do not rust?
A steel rail also has a thicker cross section. When the rust forms on the face of the rail it acts as a barrier which then slows the rate of corrosion. The top and upper side face of a rail doesn’t usually corrode because friction and wear keep it polished and free of rust.
How much does Chinese high speed train cost?
China’s high speed rail with a maximum speed of 350 km/h has a typical infrastructure unit cost of about US$ 17-21m per km, with a high ratio of viaducts and tunnels, as compared with US$25-39 m per km in Europe and as high as US$ 56m per km currently estimated in California.
How much does a length of railroad track weigh?
Most new rail in North America weighs 57.5 or 66 kg per metre (115 or 132 pounds per yard). The standard American rail section has a length of 12 metres (39 feet). Some ore mining railroads in Western Australia employ rail weighing about 68 kg per metre (about 136 pounds per yard).
What is ballast in railway track?
Ballast is the description for the aggregate beneath the rail track. The track ballast forms the track bed that suports the rail track load and provides water drainage. Rail ballast aggregate is typically 30-50mm aggretate. Hard and tough stone is required for rail ballast.
What is ballast made of?
Ballast is produced from natural deposits of granite, trap rock, quartzite, dolomite or limestone. Vulcan produces ballast and other track materials for shipment to customers from coast to coast, and has a dedicated Ballast Sales Team that can help you with your ballast needs from any of our facilities.
How many ballast stone quarries does CSX serve?
We serve 18 ballast stone quarries on our 20,000-mile network. Typical ballast stone types range from trap rock to granite. Most locations are capable of unit train shipments, and single-car and block shipments are also available. CSX can provide aggregate hopper cars for your convenience or you can provide your own ballast hoppers.
Did you know CSX can fill your need for railroad ballast?
Think CSX for your railroad ballast needs. Did you know that you can fill your need for railroad ballast simply by using CSX? We serve 18 ballast stone quarries on our 20,000-mile network. Typical ballast stone types range from trap rock to granite.