What are shade brackets?
Brackets connect a blind or shade to the ceiling or wall.
What are the parts to blinds?
Here are the names of all of the parts that make up vertical blinds:
- Valance Clips.
- Valance Corners.
- Vane Savers.
- Carrier Clips.
- Bead Chain.
- Brackets.
- Control Ends.
- Fabric Vane Parts.
What are shade side channels?
Side Channel can be installed along the sides of a shade to prevent light from entering through past the edges the fabric. Side Channel wraps the edge of the fabric and Hembar so they can freely ride inside while the shade is in motion.
Can you hang Roman shades outside window?
Roman Shades may be mounted inside or outside the window frame. When ordering your window blind of choice, make sure you specific the correct option that best fits your application. You will need at least 1 inch of window frame depth to mount roman shades although at least 3 inches will be needed for a flush mount.
What is the stick that turns the blinds called?
Wand tilt mechanisms
Introduction. Wand tilt mechanisms are used in horizontal wood, faux wood, and Venetian blinds to rotate the slats of the blind open and closed.
What is the string at the bottom of blinds called?
Plastic or metal device that holds the drum in place and guides the ladder and lift cord as they enter the bottom of the head rail of horizontal blinds. Sometimes called a ‘saddle’.
How roll up shades work?
You simply pull these blinds down, slowly stopping when the blind is in the desired position. To raise the blind, pull it down a short way using a quick motion and then hold it gently while it winds itself back into place around the roller tube.
What is a room darkening side channel?
Room Darkening Side, Centre, & Bottom Channels are installed on the window to cover the light gaps between the frame and the edge of shade fabric. Side & Centre channels include two rows of brushes within the channel to seal light out and to prevent the aluminum components from rubbing while the shade is in motion.