Ultramid® A (unreinforced) is the material with the greatest hardness, rigidity, abrasion resistance and thermostability. It is one of the preferred materials for parts subject to mechanical and thermal stresses in electrical, mechanical and automotive engineering.
Table of Contents
What is ultramid material?
Ultramid® A (unreinforced) is the material with the greatest hardness, rigidity, abrasion resistance and thermostability. It is one of the preferred materials for parts subject to mechanical and thermal stresses in electrical, mechanical and automotive engineering.
What is PA material?
PA material, polyamide or commonly called nylon, is manufactured by Ensinger in standard stock shapes for machining in sheet, rod and tube. There are often numbers associated with nylon plastics types such as 6, 66, 12 and 46.
What is difference between PA6 and PA66?
The key difference between PA6 and PA66 is that PA6 is derived from a diamine, whereas PA66 is derived from diamine and diacid. There are various types of polyamides having a wide range of properties, depending on their applications. We can denote polyamides as PA. Nylon is a type of polyamide.
What is ultradur?
Ultradur® is BASF’s brand name for its line of partially crystalline, thermoplastic, saturated polyesters derived from polybutylene terephthalate (PBT). They are employed as materials for high-quality technical components in many industry sectors.
What is PA66 GF30?
PA66 GF30 is a 30 % glass fibre reinforced PA 66. It demonstrates outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability.
Does polyamide make you sweat?
Polyamide is less colorfast than polyester. It is not breathable and can retain heat, making you sweat.
Is PA the same as nylon?
Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most common variant for engineering applications is Nylon 6/6.
What is PA plastic used for?
Nylon plastic (PA) is a synthetic thermoplastic polymer commonly used in injection molding applications. It’s a versatile, durable, flexible material often used to as a more affordable alternative other materials like silk, rubber, and latex.
Is PA66 same as nylon 66?
While, Polyamide 66 (PA66) or Nylon 66 is one of the most popular engineering thermoplastics and is majorly used as a replacement to metal in various applications. Nylon 66 is synthesized by polycondensation of hexamethylenediamine and adipic acid (two monomers each containing 6 carbon atoms).
What is PA66 GF33?
DuPont™ Zytel® Nylon Resin — Zytel® 70G33HS1L NC010 — PA66-GF33. Supplier’s Site. Zytel® 70G33HS1L NC010 is a 33% glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding.
What are the properties of Ultramid A3W?
ULTRAMID® A3W is a polyamide 66(PA66) grade. Possesses good elastic properties, high flow, dimensional stability, high creep strength and excellent sliding friction properties. Provides good toughness at low temperatures, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability.
What is Ultramid®?
Ultramid®is the trade name for polyamides supplied by BASF for injection molding and extrusion. The product range includes PA6 grades (Ultramid®B), PA66 grades (Ultramid®A), special polyamides like PA6T/6 (Ultramid®T) and PA610 (Ultramid®S Balance) as well as special grades based on copolyamides.
What is the impact strength of Ultramid®?
Even in the dry state the impact-modified, unreinforced Ultramid®grades like B3L exhibit high impact strength. They are employed when conditioning or intermediate storage for absorption of moisture are uneconomic or when extremely high notched or low-temperature impact strength are called for.
What is the normal temperature of Ultramid®A3X parts?
Here too the temperature should not exceed about 40 °C for parts made from Ultramid®A3X. duration of conditioning The time required for conditioning to the normal moisture content (standard conditions 23/50) increases with the square of the wall thickness of the parts but decreases markedly with rising temperature.