What offset for Volvo 240?

Many standard Volvo 240 rims have a 20 mm positive offset. This is good for the front, but for the rear when fitting wider rims this offset needs to be reduced by adding a spacer, otherwise the wheel will rub on the inner guard.

What offset for Volvo 240?

Many standard Volvo 240 rims have a 20 mm positive offset. This is good for the front, but for the rear when fitting wider rims this offset needs to be reduced by adding a spacer, otherwise the wheel will rub on the inner guard.

What lug nut pattern is a Volvo?

Most Volvos* use a bolt pattern of 5 on 4.25 inch (108mm). This indicates a 5-lug pattern on a 4.25 inch circle, which is pretty much unique to Volvo.

What is PCD wheel size?

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.

What is the most common PCD?

The most common PCD values are 100mm and 114.3mm, the difference arising due to manufacturers using metric or imperial measurements (4.5 inches = 114.3mm). You will need to ensure that your new wheels have the same stud pattern (4 and 5 stud shown above) and same PCD as the wheel hub on your vehicle.

Are all Volvos the same bolt pattern?

Not all Volvo bolt patterns are the same. Although a lot of them do use the 5x108mm pattern.

Is PCD same as bolt pattern?

PCD (Pitch Circle Diameter) is the measurement of the diameter of the imaginary circle drawn through all of the wheel bolts or studs on a wheel. It is also known as the ‘bolt circle’.

Is PCD stud pattern?

Pitch circle diameter(PCD) is a reference to the number of studs equally space around a circle diameter centralised on a hub face. Stud pattern is a popular term for a combination of a PCD and stud size.

How do I find my PCD?

Wheel PCD Measurement Calculation Formula

  1. 4 Stud PCD = Stud distance divided by 0.7071 to get PCD.
  2. 5 Stud PCD = Stud distance divided by 0.5878 to get PCD.
  3. 6 Stud PCD = Stud distance divided by 0.5 to get PCD.

Can 5×112 fit on 5×108?

PCD variation nuts only allow for 2.4mm of movement so you could run 5×112 wheel on a 5×114. 4 car or 5×109. 6 car but not down to 5×108. You need adapters or a redrill.