# Where should door hinges be placed?

## Where should door hinges be placed?

Determine the correct placement of the door hinges. The top hinge is typically located seven inches below the top of the door frame, and the second hinge is situated 11 inches from the door frame bottom. When a third hinge is needed to support a heavy door, it’s located directly in the middle of the first two.

## Does it matter where you put hinges on a door?

Because gravity works on a door in this way, hinges are placed on the high side, with the bottom hinge 10 inches from the bottom of the door and the top one 5 inches from the top of the door. You can get away with two hinges on a light, hollow-core door, but will need at least three on solid core or exterior doors.

At what height are door hinges?

If you intend to use new door hinge positions you will need to mark the door hinge positions on the frame and the door, exterior or interior doors should be hinged between 125-150mm (5-6 inches) from the top of the door and 175-230mm (7-9 inches) from the bottom of the door.

### How far should door hinges stick out?

Place the top hinge 5 inches from the top of the door and the bottom hinge 10 inches from the bottom of the door. If the door frame is already mortised, follow that placement pattern for the door.

### Which side of a door hinge goes on the frame?

The leaf with the end of knuckle configuration should be fitted to the frame. At the determined spacing, position the hinge leaf (internal knuckle configuration) to the door so that the edge of leaf by knuckle is flush with edge of door and mark around leaf.

How much space do you need for door hinges?

There should be a 5″ distance between the top of the door and the highest hinge, and 10″ from the bottom of the door to the lowest hinge. All hinges in between should be equally spaced from one another. Leave a small gap between the door’s frame and the edge of the hinge’s leaf.

#### Which side of a hinge goes on the door?

Mark the Hinge Placement on the Door Use the tape measure to mark the on-center placement points for the hinges. Lay a hinge down on the mark. The pin side should be on the side of the door swing. The hinge must step back from the edge of the door.

#### Should you attach hinges to door or frame first?

Step 6: Fitting your door to the frame It’s always easier to attach the top hinge first. The screw heads need to sit nice and squarely into the hinge, since this will allow the door to open and close much more smoothly. Once you have fitted most of the screws, have a try at opening and closing your door.

Can you install a door hinge upside down?

When it is upside down, you have to put the pin in from the bottom up because it could potentially fall out, because the hinge has a bushing at the bottom which matches the top of the pin.